|
| |
TM 5-2420-222-20-2
PLEXIGLASS DASH COVER
This task covers:
a.
Removal (page 2-576)
d.
Repair (page 2-577)
b.
Cleaning (page 2-576)
e.
Installation (page 2-578)
INITIAL SETUP:
Tools
Materials/Parts - Continued
Handle, ratchet, 3/8-inch drive
Solvent, drycleaning (item 28, Appendix C)
Socket, 3/8-inch drive, 7/16-inch
Rags, wiping (item 30, Appendix C)
Materials/Parts
Personnel Required
Detergent, GP (item 7, Appendix C)
One
ACTION
LOCATION
ITEM
REMARKS
NOTE
Loader backhoes have two configurations of plexiglass cover. Both are maintained
the same way. Cover for loader backhoes with Serial Numbers 319995 thru 342573
is shown.
REMOVAL
1.
Plexiglass cover
Three screws (5)
Using 7/16-inch, 3/8-inch drive socket
(1), three thick
and washers (6)
and ratchet handle, unscrew and take off.
washers (2), dash
(3), and cowl (4)
2.
Dash (3)
Plexiglass
Take off.
cover (1) and
three thick
washers (2)
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions
(page 2-137).
2-576
|
