|
| |
TM 5-2420-222-20-2
IGNITION LOCK SWITCH AND KEY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
ACC terminal (1)
Nut (3) and
a.
Using 3/8-inch box wrench, unscrew
and terminal (2)
lockwasher (4)
and take off.
b.
Get rid of lockwasher (4).
2.
ACC terminal (1)
Terminal (2)
a.
Tag (page 2-137).
b.
Take off.
3.
ACC terminal (1)
Nut (6) and
a.
Using 3/8-inch box wrench, unscrew
and terminal (5)
lockwasher (7)
and take off.
b.
Get rid of lockwasher (7).
4.
ACC terminal (1)
Terminal (5)
a.
Tag (page 2-137).
b.
Take off.
NOTE
Steps 5 and 6 only apply to loader backhoes with Serial Numbers 319995 thru
342573.
5.
IGN terminal (8)
Nut (10) and
a.
Using 3/8-inch box wrench, unscrew
and terminal (9)
lockwasher (11)
and take off.
b.
Get rid of lockwasher (11).
6.
IGN terminal (8)
Terminal (9)
a.
Tag (page 2-137).
b.
Take off.
7.
IGN terminal (8)
Nut (13) and
a.
Using 3/8-inch box wrench, unscrew
and terminal (12)
lockwasher (14)
and take off.
b.
Get rid of lockwasher(14).
8.
IGN terminal (8)
Terminal (12)
a.
Tag (page 2-137).
b.
Take off.
9.
BATT terminal (15)
Nut (17) and
a.
Using 3/8-inch box wrench, unscrew
and terminal (16)
lockwasher (18)
and take off.
b.
Get rid of lockwasher(18).
10.
BATT terminal (15)
Terminal (16)
a.
Tag (2-137).
b.
Take off.
11.
Ignition lock
Special nut (21)
Holding switch (19) to keep it from turn-
switch (19)
and washer (22)
ing, using 7/8-inch open-end wrench,
control box (20)
unscrew and take off.
12.
Control box (20)
Ignition lock
Take out.
switch (19)
2-566
|
