TM 5-2420-222-20-2 COWL WIRING HARNESS - CONTINUED ACTION LOCATION ITEM REMARKS REMOVAL 1. Main wiring Connector (2) a. Tag (page 2-137). harness b. Lift tabs on connector (2) and unplug. connector (1) 2. Connector(3) Ac generator a. Tag (page 2-137). indicator light b. Using 1/8-inch flat-tip screwdriver, lead connector (4) lift tab on connector (4) and unplug. 3. Connector (5) Oil pressure a. Tag (page 2-137). indicator light b. Using 1/8-inch flat-tip screwdriver, lead connector (6) lift tab on connector (6) and unplug. 4. FUEL gage Nut (9) and a. Using 11/32-inch box wrench, unscrew terminal (7) lockwasher (10) and take off. and terminal (8) b. Get rid of lockwasher (10). 5. FUEL gage Terminal (8) a. Tag (page 2-137). terminal (7) b. Take off. 6. FUEL gage Nut (13) and a. Using 3/8-inch box wrench, unscrew terminal (11) lockwasher (14) and take off. and terminal (12) b. Get rid of lockwasher (14). 7. FUEL gage Terminal (12) a. Tag (page 2-137). terminal (11) b. Take off. 8. Oil pressure Connector (16) a. Tag (page 2-137). indicator b. Pull off. light terminal (15) 9. Ac generator Connector (18) a. Tag (page 2-137). indicator b. Pull off. light terminal (17) 10. Cowl (19) Cowl wiring Note routing for proper placement during harness (20) installation and take out. CLEANING NOTE For more information on how to clean parts, go to General Maintenance Instructions (page 2-137). 2-560