|
| |
TM 5-2420-222-20-2
FUEL LEVEL GAGE - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Terminal (1), and
Nut (3) and
a.
Using 3/8-inch open-end wrench,
terminal (2)
lockwasher (4)
unscrew and take off.
b.
Get rid of lockwasher (4).
2.
Terminal (1)
Terminal (2)
a.
Tag (page 2-137).
and nut (5)
b.
Take off.
3.
Terminal (6) and
Nut (8) and
a.
Using 11/32-inch open-end wrench,
terminal (7)
lockwasher (9)
unscrew and take off.
b.
Get rid of lockwasher (9).
4.
Terminal (6)
Terminal (7)
a.
Tag (page 2-137).
and nut (10)
b.
Take off.
5.
Terminal (1) and
Nut (5)
Using 3/8-inch open-end wrench, unscrew
bracket (11)
and take off.
6.
Terminal (6) and
Nut (10)
Using 11/32-inch open-end wrench,
bracket (11)
unscrew and take off.
NOTE
Make sure insulating grommets do not fall out of bracket during removal.
7.
Dash (12) and two
Bracket (11)
Take off.
terminals (1 and 6)
8.
Dash (12)
Liquid
Take out.
indicator (13)
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
2-540
|
