|
| |
TM 5-2420-222-20-2
CIGAR LIGHTER GROUND WIRE ASSEMBLY (SERIAL NUMBERS 319995 THRU 342573 ONLY)
This task covers:
a.
Removal (page 2-536)
d.
Repair (page 2-538)
b.
Cleaning (page 2-536)
e.
Assembly (page 2-538)
c.
Inspection/Replacement (page2-537)
f.
Installation (page 2-538)
INITIAL SETUP
Materials/Parts
Personnel Required
Cleaning compound, solvent,
One
(item 4, Appendix C)
Rags, wiping (item 21, Appendix C)
Equipment Condition
Tags, marking (item 30, Appendix C)
Warning light flasher and bracket removed
(page 2-657)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1.
Cigar lighter
Connector (2)
a.
Tag (page 2-137).
terminal (1)
b.
Unplug.
2.
Loader backhoe
Cigar lighter ground
Note routing for proper placement during
wire assembly (3)
installation and take out.
CLEANING
NOTE
For more information on how to clean parts, go to General Maintenance Instructions (page 2-137).
WARNING
Electrical parts solvent cleaning compound (trichlorotrifluoroethane) is flammable, and reacts violently with aluminum,
titanium, barium, lithium, samarium, and sodium potassium. Cleaning compound fumes displace air and it may be
carcinogenic. Boiling point is 114°F (46°C). Do not wear jewelry. Wear rubber gloves and use only in well ventilated area.
Avoid contact with skin, eyes, and clothes and do not breathe vapors. Do not use near open flame or excessive heat. If
you become dizzy while using cleaning compound, get fresh air immediately and get medical aid. If contact with eyes is
made, wash your eyes with water and get medical aid immediately.
2-536
|
