 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-222-20-1
RADIATOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
49.
Screw (1)
Spring (2)
Put in place.
50.
Front support (3),
Screw (1) with
Screw in but do not tighten.
rubber washer (4),
assembled spring (2)
and oil cooler (5)
51.
Screw (6)
Spring (7)
Put in place.
52.
Front support (3),
Screw (6) with
Screw in and tighten using 9/16-inch,
rubber washer (8),
assembled spring (7)
318-inch drive socket, 5-inch extension
and radiator (9)
and ratchet handle.
53.
Front support (3),
Screw (1) with
Using 9/16-inch, 3/8-inch drive socket,
rubber washer (4),
assembled spring (2)
5-inch extension, and ratchet handle,
and oil cooler (5)
tighten.
54.
Fan (10)
Fan shroud (11)
Take off.
55.
Radiator (9) and
Fan shroud (11)
Put in place.
oil cooler (5)
56.
Fan shroud (11),
Four screws (12)
Screw in and tighten using 3/16-inch flat-
radiator (9), and
tip screwdriver.
oil cooler (5)
57.
Fuel tank (13) and
Tie rod (14) and
a. Put in place.
radiator (9)
assembled special
b. With washer (16) and nut (15) pushed
nut (15) and
against fuel tank flange and radiator
washer (16)
held upright, using 6-inch steel
machinist's rule, measure distance
between hole in radiator bracket and
hole in tie rod (14).
c. Take out.
d. Secure rod (14) In machinist's vise.
e. Using 6-inch steel machinist's rule
and 9/16-inch open-end wrench, screw
out nut (15) same distance measured
in b.
above.
f. Take rod (14) out of machinist's vise.
g. Put in place.
2-382
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals