CLEANING (cont)

TM 5-2420-222-20-1

ENGINE STARTING AID FLUID INJECTION SOLENOID - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

WARNING

Drycleaning solvent P-D-680 is toxic and flammable. Wear protective goggles and gloves and use only in

a well ventilated area. Avoid contact with skin, eyes, and clothes and don't breathe vapors. Do not use

near open flame or excessive heat. The flashpoint is 1000F to 1380F (380 to 590C). If you become dizzy

while using cleaning solvent, get fresh air immediately and get medical aid. If contact with eyes is made,

wash your eyes with water and get medical aid immediately.

Ether bums easily. If engine starting aid is not properly installed, do not release ether In confined areas or

near open flame. Engine primer fluid cylinder is pressurized to expel ether when fluid injection solenoid is

activated. Do not heat engine primer fluid cylinder or place it in fire.

15.

Engine primer

a. Using clean, dry rags dampened with

fluid (2)

drycleaning solvent, wipe clean.

b. Using clean, dry rags, wipe dry.

16.

All other metal

a. Clean in drycleaning solvent.

parts

b. Using clean, dry rags, wipe dry.

2-301