REMOVAL (cont) -624880359

TM 5-2420-222-20-1

ENGINE STARTING AID FLUID INJECTION SOLENOID CONTINUED

ACTION

LOCATION

ITEM

REMARKS

REMOVAL CONTINUED

WARNING

Ether burns easily. If engine starting aid is not properly installed, do not release ether in confined areas

or near open flame. Engine primer fluid cylinder is pressurized to expel ether when fluid injection

solenoid is activated. Do not heat engine primer fluid cylinder or place it in fire.

NOTE

Steps 3 thru 6 only apply to loader backhoes with Serial Numbers 235786 thru 235999.

3. Solenoid (1),

Two screws (4),

a. Using 112-inch, 3/8-inch drive socket,

bracket (2), and

lockwashers (5),

5-inch extension, ratchet handle, and

terminal (3)

washers (6), and

1/2-inch box wrench, unscrew and take

nuts (7)

apart.

b. Get rid of lockwashers (5).

4. Bracket (2) and

Solenoid (1) with

Take off.

terminal (3)

assembled parts

5. Engine

Fuel filter

Remove (page 2-277).

assembly

6. Cylinder head (8)

Bracket (2)

Take off.

NOTE

Steps 7 and 8 only apply to loader backhoes with Serial Numbers 319995 thru 342573.

7. Solenoid (1),

Two screws (10),

a. Using 112-inch, 318-inch drive socket,

hood (9),

lockwashers (11),

ratchet handle, and 112-inch box

and terminal (3)

washers (12),

wrench, unscrew and take apart.

spacers (13), and

b. Get rid of lockwashers (11).

nuts (14)

8. Hood (9) and

Solenoid (1) with

Take off.

terminal (3)

assembled parts

2-298