| ||||||||||
| 
 
  | 
![]() TM 5-2420-222-20-1 
LEAK-OFF CAP-TO-FUEL TANK FUEL LINE - CONTINUED 
ACTION 
LOCATION 
ITEM 
REMARKS 
INSTALLATION - CONTINUED 
WARNING 
No open flames, welding, grinding, smoking, or use of heat producing devices permitted near fuel tank 
and fuel lines during maintenance unless the fuel tank has been cleaned and purged of all flammable 
liquids and vapors. Fuel burns easily and fumes are explosive. Keep battery disconnected. Failure to 
observe these precautions could cause serious injury. 
18. Cap (1) and 
Nut (3) 
Screw on and tighten using 9116-inch 
tube (2) 
open-end wrench. 
19. Connector (4) 
Tube (2) 
Screw on and tighten using 1/2-inch open- 
end wrench. 
20. 
Loader backhoe 
Fuel systemPrime (page 2-340). 
21. 
Battery ground 
Connect (page 2-696). 
22. 
Engine 
Start and run at high idle 
 (TM 5-2420-222-10). 
23. 
Leak-off cap-to- 
a. Check for leaks. 
fuel tank fuel line 
b. If leaking at any connection, tighten 
using 7/16-inch, 112-inch, or 9/16- 
inch open-end wrench. 
c.  If leaking does not stop, shut down 
engine  (TM 5-2420-222-10) and 
replace leaking connection parts as 
outlined in this task. 
24. 
Engine 
If still running, shut down 
 (TM 5-2420-222-10). 
2-272 
 | 
| 
 
 Privacy Statement - Press Release - Copyright Information. - Contact Us  |