 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-222-20-1
AIR CLEANER HOSES AND PIPES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION/REPLACEMENT- CONTINUED
18.
All threaded parts
Check for damaged threads.
ASSEMBLY
19.
Pipe (1)
Cushion (2)
a. If removed on loader backhoes with Serial
Numbers 319995 thru 342573 only, apply metal
adhesive in 0.06 to 0.18-inch (1.52 to 4.57 mm)
wide beads in 2.00-inch (56.8 mm) or smaller
squares.
Make sure that outside bead Is within
0.25-inch (6.35 mm) of edge with no gaps.
b. Place in position as noted during removal for a
moment to transfer some metal adhesive to
pipes (1).
c. Take off and allow metal adhesive to set for
about two minutes.
d. Press firmly into place.
20.
Hose (3)
Slide on.
21.
Hose (3)
Clamp (4)
a. Place in position.
b. Using 114-inch flat-tip screwdriver, tighten.
22.
Clamp (5)
Place in position.
23.
Pipe (1)
Hose (6)
Slide on.
24.
Hose (6)
Clamp (7)
a. Place in position.
b. Using 1/4-inch flat-tip screwdriver, tighten.
25.
Clamp (8)
Place in position.
INSTALLATION
26.
Air inlet (9)
Hose (6) with
Slide on.
assembled parts
27.
Hose (6)
Clamp (8)
Using 1/4-inch flat-tip screwdriver, tighten.
2-248
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals