INSTALLATION -624880297

TM 5-2420-222-20-1

AIR INLET HOUSING - CONTINUED

ACTION

LOCATION

ITEM

REMARKS

INSTALLATION - CONTINUED

WARNING

Ether burns easily. If engine starting aid is not properly installed, do not release ether in

confined areas or near open flame. Engine primer fluid cylinder is pressurized to expel

ether when fluid injection solenoid is activated. Do not heat engine primer fluid cylinder

or place it in fire.

20. Elbow (1)

Tube (2) with

Place in position.

assembled nut (3)

21.

Nut (3)

Screw on and tighten using 3/8-inch open-

end wrench.

22. Air inlet (4)

Hose (6) with

Slide down.

and pipe (5)

assembled two

clamps (7)

23. Hose (6)

Two clamps (7)

a. Place in position.

b. Using 1/4-inch flat-tip screwdriver,

tighten.

TASK ENDS HERE

TA242822

2-236