 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2420-222-20-1
FUEL INJECTION TUBES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
30. Four tubes
Two straps (5 and 6)
Place position.
(1 thru 4)
and two clamps (7)
31. Two straps (5 and 6)
Three screws (8)
Screw in and tighten using 5116-inch
and two clamps (7)
and new
open-end wrench.
lockwashers (9)
32. Loader backhoe
Fuel system
Prime (page 2-340).
33.
Battery ground
Connect (page 2-696).
cable
34.
Engine
Start and run at high idle
(TM 52420-222-10).
35. Engine
Fuel injection
a. Check for leaks.
tubes
b. If leaking at nut (10) and cap (11),
tighten using 9/16-inch open-end
wrench.
c. If leaking does not stop or if leaking
at any other connection, shut down
engine (TM 5-2420-222-10) and re-
place leaking connection grommet,
washer, or tube as outlined in this
task.
36. Loader backhoe
Engine
If still running, shut down
(TM 5-2420-222-10).
2-220
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals