ENGINE - CONTINUED
FILLING - CONTINUED
Start (TM 5-2420-222-10).
Let run for two minutes.
Shut down (TM 52420-222-10).
Allow oil to drain back into oil pan (1) for one
Liquid level gage nipple and adapter are similar and perform the same function. Adapter is shown.
a. Pull out.
b. Using clean, dry rag, wipe off.
c. Place in position.
Be sure gage is fully seated.
d. Pull out and read oil level.
Oil level should be between add and full
e. Place in position.
f. If engine oil level is too low, repeat steps 6 thru
10, and 13.
TASK ENDS HERE