ORGANIZATIONAL TROUBLESHOOTING - CONTINUED
TEST OR INSPECTION
b. If right brake line and fittings are leaking, repair (page 2-879).
c. If left (1) and right (2) service brake lines and fittings are not leaking, go to step 2.
Step 2. Check for air in system, contaminated fluid, and restrictions in hydraulic lines by bleeding hydraulic brake
system (page 2-870).
a. Bleeding procedure removes air from brake systems.
b. If air cannot be removed from system, or if fluid is contaminated,
notify Direct Support
c. If no air is found in system, go to step 3.
Step 3. Go to Brake Malfunction 3: Brakes Dragging Or Running Hot (page 2-108).
5. BRAKES CHATTER
Go to Brake Malfunction 4: Either Brake Pedal Moves More Than l-Inch (25.4 mm) When Pushed For One
Minute After Initial Application (page 2-108).