ENGINE FAILS TO CRANK WHEN STARTER IS ENGAGED WARNING (cont) -624880084

TM 5-2420-222-20-1

ORGANIZATIONAL TROUBLESHOOTING CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

Step 11.

Using 1/2-inch open-end wrench and 1/2-inch box wrench, loosen nut (6). Take terminal clamp (7)

off of negative (-) battery terminal (8). Using multimeter set to Rx1 scale, place red probe on

terminal clamp (7) and black probe on terminal clamp (9). Check for 0 ohm on multimeter.

a. If multimeter reads 0 ohm, place terminal clamp (7) onto negative (-) battery terminal (8) and

tighten nut (6) using 1/2-inch open-end box wrench. Go to step 12.

b. If multimeter reads more than 0 ohm, replace battery connector cable (2-704).

2-23