|
|
TM 5-2420-222-20-1
ORGANIZATIONAL TROUBLESHOOTING CONTINUED
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
b. If connection at terminal (11) is loose, tighten nut (13) using two 7/16-inch open-end wrenches.
c. If connection at terminal (11) and wire terminal (12) is corroded, clean using wire brush.
d. If terminal (11) is broken, replace ac generator (alternator) (page 2-436).
e. If connection at wire terminal (12) is frayed or broken, repair (page 137).
2-18
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |