Removal - continued -714360087

TM5-241O-237-34

3-9. CYLINDER HEAD ASSEMBLY AND SPACER PLATE - REPLACE/REPAIR (Cont'd)

(11) Slowly and carefully lift the

cylinder head from the cylinder

block, and place it on a

suitable stand or platform which

will support the bottom

perimeter of the cylinder head.

(12) Remove and discard cylinder head

gasket (6).

(13) Use a snap ring pliers to remove

eighteen water seals (7) and six

water seals (8) from spacer plate

(9). Discard water seals.

(14) Remove preformed packing (10)

from dowel and discard.

(15) Remove spacer plate (9) from

cylinder block.

(16) Remove and discard preformed

packing (11) from hollow dowel

in cylinder block.

(17) Remove and discard spacer plate

gasket (12) from cylinder block.

3-32