 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM5-241O-237-34
3-4. ENGINE ASSEMBLY - REPLACE (Cont'd)
(6) Remove all clamps or ties that
attach STE/ICE harness to
engine and remove harness from
starter, alternator, and tach
drive. Tag all cables as to
their location and remove
STE/ICE harness from engine.
(7) Install STE/ICE wiring harness
and ties that secure harness to
the replacement engine and
connect wires to starter,
alternator, and tach drive on
replacement engine.
(8) Position shims (62) in place on
rear mount surface on the main
frame. Be sure locating pins
(65) are in position on main
frame.
(9) Attach lifting equipment (61)
to three lifting brackets on
replacement engine. Install
engine in machine, keep
crankshaft centerline
horizontal. Make sure rear
engine mounts fit onto locating
pins in frame.
(10) Install two capscrews (58),
washers (60), and nuts (59)
into front engine mounting
bracket. Tighten capscrews to
325+25 lb. ft. -
3-11
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals