|
| |
SECTION I
TM5-2410-237-24P
5.
Special Information.
the following subparagraphs as applicable:
a.
USABLE ON CODE. The usable on code
appears in the lower left corner of the Description in
heading. Usable on codes are shown as "UOC: re
Description Column justified left) on the first line following
applicable item description/nomenclature. Uncoded
items are applicable to all models. Identification of the
usable on codes used in the RPSTL are:
Code
Used On
WIN
Model D7G w/ Winch
RIP
Model D7G w/Ripper
GRC
Model D7G w/Ripper
and Winterized Cab
GWC
Model D7G w/Winch
and Winterized Cab
b.
FABRICATION
INSTRUCTIONS.
Bulk
materials required to manufacture items are listed in the
Bulk Material Functional Group of this RPSTL. Part
numbers for bulk materials are also referenced in the
description column of the line item entry for the item to
be pufactured/fabricated. Detailed fabrication ructions
for items source coded to be manufactured or fabricated
are found in TM5-2410-237-20 and TM5-2410-237-34.
c.
ASSEMBLY
INSTRUCTION.
Detailed
assembly instructions for items source coded to be
assembled from component spare/repair parts are found
in TM5-2410-237-20 and TM5-2410-237-34. Items that
make up the assembly are listed immediately following
the assembly item entry or reference is made to an
applicable figure.
d.
KITS. Line item entries for repair parts kits
appear in group 9401 in Section II.
e.
INDEX NUMBERS. Items which have the
word BULK in the figure column will have and index
number shown in the item number column. This index
number is a cross-reference between the National Stock
Number/Part Number Index and the bulk material list in -
tion II.
f.
ASSOCIA TED PUBLICATIONS. The
publications listed below pertain to the M1061 Tractor,
and its components:
Publication
Short Title
LO 5-2410-237-12
Lubrication Order
TM 5-2410-237-10-HR
Hand Receipt
TM 5-2410-237-10
Operator
TM 5-2410-237-20
Unit Support
TM 5-2410-237-34
DS & GS
DMWR 5-2410-237
Depot
6.
How to Locate Repair Parts.
a.
When National Stock Number or Part
Number is Not Known.
(1)
First. Using the table of contents,
determine the assembly group or subassembly group to
which the item belongs. This is necessary since figures
are prepared for assembly groups and subassembly
groups, and listings are divided into the some groups.
(2)
Second. Find the figure covering the
assembly group or subassembly group to which the item
belongs.
(3)
Third. Identify the item on the figure
and use the Figure and Item Number Index to find the
NSN.
b.
When National Stock Number or Part Number is
Known.
(1)
First.
Using
the
National
Stock
Number or the Part Number Index, find the pertinent
National Stock Number or Part Number. The NSN index
is in National Item Identification Number (NIIN) sequence
(see 4.a(1)). The part numbers in the Part Number index
are listed in ascending alphanumeric sequence (see
4.b). Both indexes cross-reference you to the
illustration/figure and item number of the item you are
looking for.
(2)
Second. Turn to the figure and item
number, verify that the item is the one you’re looking for,
then locate the item number in the repair parts list for the
figure.
7.
Abbreviations.
For standard abbreviations see MIL-STD-1 2D, Military
Standard
Abbreviations
For
Use
On
Drawings,
Specifications, Standards And In Technical Documents.
5
|
