TM 5-2410-237-23P
FIELD MAINTENANCE (UNIT AND DIRECT SUPPORT MAINTENANCE) REPAIR PARTS AND
SPECIAL TOOLS LISTS (RPSTL) ALSO INCLUDES SUSTAINMENT MAINTENANCE
(GENERAL SUPPORT AND DEPOT MAINTENANCE INTRODUCTION - CONTINUED
0001 00
SPECIAL INFORMATION - CONTINUED
Cancelled and Replaced By Part Numbers. Caterpillar implements a Modernization through Spares program for
b.
its equipment through the use of cancelled and replaced by part numbers. If the part number you ordered has been
cancelled and replaced by a new part, the new part will be automatically shipped to you. Install this new part; DO
NOT return it.
Usable On Code (UOC). The UOC appears in the lower left corner of the DESCRIPTION column heading.
c.
Usable on codes are shown as "UOC:" in the Description Column (justified left) on the first line under the applica-
ble item/nomenclature. Uncoded items are applicable to all models. Identification of the UOC's used in the RPSTL
are:
Used On
Code
WIN
Model D7G W/winch
RIP
Model D7G W/ripper
GRC
Model D7G W/Ripper and Winterized Cab
GWC
Model D7G W/winch and Winterized Cab
Fabrication Instructions. Bulk materiels required to manufacture items are listed in the Bulk Materiel functional
d.
group of this RPSTL. Part numbers for bulk materiel are also referenced in the Description Column of the line item
entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be
manufactured or fabricated are found in TM 5-2410-237-23.
Index Numbers. Items which have the word BULK in the figure column will have an index number shown in the
e.
item number column. This index number is a cross-reference between the NSN/P/N Index work package and the
bulk materiel list in the repair parts list work package.
Associated Publications. The publication(s) listed below pertain to the D7G Tractor and its components:
f.
Publication
Short Title
TM 5-2410-237-10 . . . . . . . . . . . . . . . . . . . . Operator's Manual for Tractor, Full Tracked, Low Speed
TM 5-2410-237-23 . . . . . . . . . . . . . . . . . . . . Field Maintenance Manual for Tractor, Full Tracked, Low
Speed
HOW TO LOCATE REPAIR PARTS
When National Stock Number is Known:
a.
First. If you have the NSN, look in the STOCK NUMBER column of the NSN index work package. The
(1)
NSN is arranged in NIIN sequence. Note the figure and item number next to the NSN.
Second. Turn to the figure and locate the item number. Verify that the item is the one you are looking for.
(2)
When Part Number is Known.
b.
First. If you have the P/N and not the NSN, look in the PART NUMBER column of the P/N index work
(1)
package. Identify the figure and item number.
Second. Look up the item on the figure in the applicable repair parts list work package.
(2)
0001 00-6
