 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
PRESSURE CONTROL VALVE REPAIR - CONTINUED
0245 24
ASSEMBLY - CONTINUED
NOTE
Seat is a press-fit in valve body. Seat must be chilled before it is installed.
5.
Install seat (21) in valve body (4) until fully seated.
6.
Install new O-ring (20) on adapter (18) and install adapter in valve body (4).
7.
Install new O-ring (19) on plug (17) and install plug in valve body (4).
8.
Install ball (15) and spring (14) in valve body (4).
9.
Install new O-ring (16) on plug (13) and install plug in valve body (4). Tighten plug to 25 lb-ft (34 Nm).
10.
Install stem (12) in valve body (4). Position spring (9) in stem.
NOTE
Install same quantity of shims as were removed.
11.
Install valve (11) and new shims (10) in valve body (4). Position inner spring (8) and outer spring (7) in valve.
12.
Install new O-rings (5 and 6) on cover (3).
13.
Install cover (3) on valve body (4) with four new lockwashers (2) and screws (1).
1
2
3
7
10
5
6
9
11
8
12
22
13
23
4
21
19
16
17
14
15
20
18
28
27
19
29
17
25
26
24
421-0069
14.
Install protective caps in hydraulic pressure control valve.
END OF WORK PACKAGE
0245 24-5
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals