 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
RIPPER CONTROL VALVE REPAIR - CONTINUED
0245 23
WARNING
Wear eye protection when repairing ripper control valve. Ripper control valve contains springs under com-
pression. Failure to exercise caution during disassembly and assembly may result in injury to personnel.
CAUTION
To prevent contamination of hydraulic system, keep work area and components of ripper control valve clean.
DISASSEMBLY
NOTE
Tag components as they are disassembled to ensure correct assembly.
1.
Remove any protective caps that are installed in ripper control valve.
WARNING
Wear eye protection when removing cover from ripper control valve. Cover holds spring under compres-
sion. Bolts should be removed slowly and evenly to avoid injury and lost or damaged parts.
2.
Remove two bolts (1) and cover (2) from valve body (3).
3.
Remove O-ring (4) from cover (2). Discard O-ring.
4.
Remove seat (5), valve (6), spring (7) and valve (8) from valve body (3).
5.
Remove O-ring (9) from seat (5). Discard O-ring.
6.
Remove six capscrews (10), washers (11) and plate (12) from valve body (3).
7.
Remove three O-rings (13) from plate (12). Discard O-ring.
Change 1
0245 23-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals