 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE TILT AND RIPPER PILOT VALVE ASSEMBLY REPAIR - CONTINUED
0245 22
DISASSEMBLY - CONTINUED
NOTE
Steps 8-15 describe disassembly of ripper pilot valve. Disassembly of blade tilt pilot valve is the same, except
blade tilt pilot valve has no plug in end of spool valve.
8.
Remove two bolts (15), washers (16) and housing (17) from end of ripper pilot valve (9) opposite stem end.
9.
Remove O-ring (18) from housing (17) and discard O-ring.
10.
Remove plug (19) from housing (17). Remove O-ring (20) from plug and discard O-ring.
11.
Remove spool valve (21) from valve body.
12.
Carefully put spring (22) under compression and remove retainers (23). Slowly release compression from spring and
remove spring and retainers (24) from spool valve (21).
13.
Remove plug (25) from end of spool valve (21). Remove seal (26) from plug and discard seal.
21
OUTLET
9
BLADE TILT
MANIFOLD
PILOT VALVE
INLET
MANIFOLD
26
25
24
22
23
17
18
16
15
20
387-0071
19
Change 1
0245 22-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals