|
|
TM 5-2410-237-23
BLADE CONTROL VALVE (LIFT AND TILT) REPAIR - CONTINUED
0245 21
DISASSEMBLY - CONTINUED
5
7
5.
Remove shims (8), two pistons (9), springs (10), and
relief pilot valves (11) from cover (6). Discard springs.
8
8
6.
Remove four bolts (12), washers (13), and cover (6)
10
from valve body (14).
5,7
9
11
12,13
6
14
1
2,3
4
421-0061
7.
Remove three O-rings (15, 16 and 17) from bottom of cover (6). Discard O-rings.
8.
Remove two valve seats (18 and 19) from bottom of cover (6).
9.
Remove seal (20) from valve seat (18). Remove O-ring (21) from valve seat (19). Discard seal and O-ring.
10.
Remove two springs (22 and 23) for main relief valve (24) from valve body (14). Discard springs.
11.
Remove small spring (25) for tilt relief valve (26) from valve body (14). Discard spring.
12.
Remove main relief valve (24) and tilt relief valve (26) from valve body (14).
6
18
20
15
22
23
24
17
19
21
16
25
26
14
421-0062
0245 21-3
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |