DISASSEMBLY - TM-5-2410-237-231500

TM 5-2410-237-23

WINCH ASSEMBLY REPAIR - CONTINUED

0245 19

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during

procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep

clear of heavy parts supported only by lifting device. Failure to follow this warning may result in injury

or death.

Ensure winch assembly is securely supported on before proceeding with repair.

DISASSEMBLY

CAUTION

Before disassembling winch, all dirt and grease accumulations should be removed from exterior of winch

case. To prevent contamination of winch, keep work area and components of winch clean.

NOTE

Tag parts during disassembly to ensure correct assembly.

Remove Idler Gear.

Remove 16 bolts (1), lockwashers (2), access cover (3) and gasket (4) from idler gear compartment of case (5).

Discard gasket and lockwashers.

Remove plug (6) and gasket (7) from access cover (3). Discard gasket.

Remove 10 capscrews (8) and lockwashers (9) from bearing cage (10) and case (5). Discard lockwashers.

Change 1

0245 19-2