|
|
TM 5-2410-237-23
TRANSMISSION ASSEMBLY REPAIR - CONTINUED
0245 15
ASSEMBLY - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death.
NOTE
Weight of cage and shaft assembly is 60 lb (27 kg).
106. Install two lifting links in bearing cage (16) assembly
with 3/8-16NC bolts, attach lifting device and install
55
bearing cage and input shaft (58).
107. Install six capscrews (56) in bearing cage (16).
16
56
108. Install new seal (55) on bearing cage (16).
58
109. Check clutches with compressed air. Refer to Inspec-
tion in this work package.
421-0198
110. Install new lip-type seals (53 and 52) and bearing (54) in transmission case (2).
111. Install shaft (51) partway in transmission case (2).
112. Install cam (50) on shaft (51) and install shaft into bearing (54) in transmission case (2).
113. Install pin (49) in cam (50).
114. Install washer (48) and nut (47).
115. Install detent assembly (41), sleeve (46), capscrew (42), nut (43), new lockwasher (44) and washer (45).
116. Install spring (40) on detent assembly (41).
47
48
42
40
50
2
51
45
49
41
53,54
46
52
44
421-0197
43
Change 1
0245 15-42
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |