ASSEMBLY - CONTINUED - TM-5-2410-237-231470

TM 5-2410-237-23

TRANSMISSION ASSEMBLY REPAIR - CONTINUED

0245 15

ASSEMBLY - CONTINUED

NOTE

Apply thin coat of clean oil to ring and seal.

61.

Install new seal (112) and new ring (111) on No. 2 piston (110) and No. 2 clutch housing (109).

62.

Install piston (110) in No. 2 clutch housing (109).

63.

Install 10 new springs (113).

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death.

NOTE

Weight of clutch housing is 75 lb (34 kg).

Ensure that springs (113) align with recess in No. 2 clutch housing.

64.

Install two lifting links in No. 2 clutch housing (109) with 1/2-13NC bolts or link brackets, attach lifting device, and

install clutch housing in position on springs (113).

Change 1

0245 15-34