 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TORQUE DIVIDER REPAIR - CONTINUED
0245 14
ASSEMBLY - CONTINUED
35.
Install 34 capscrews (14) and washers (15) that hold impeller (16) to housing (17). Torque capscrews evenly to 20 1
lb-ft (27 1 Nm).
36.
Install new preformed packing (13) onto carrier (20).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death.
NOTE
Housing weighs 89 lb (40 kg).
37.
Install two lifting links in cover (2) with 3/8-16NC bolts, attach lifting device and put housing (2) in position over torque
divider (12). Remove lifting links.
38.
Install eight capscrews (10) and new lockwashers (11) that hold cover (2) to torque divider (12).
10
11
LIFTING LINK
2
13
14,15
12
11
421-0159
0245 14-14
Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals