|
|
TM 5-2410-237-23
GOVERNOR REPAIR - CONTINUED
0245 12
DISASSEMBLY - CONTINUED
8.
Remove two snap rings (22) from two pins (23).
26
9.
Remove two pins (23). Remove plates (24) and stop
(25) from shaft assembly (26).
10.
Remove pins (27) and (28), and spring (29). Discard
pin (28) and spring.
27
28
29
25
24 23
22
421-0226
11.
Remove two bolts (30), two washers (31), cover (32)
39
and O-ring (33). Discard O-ring.
38
12.
Remove two bolts (34), cover (35), and gasket (36).
37
Discard gasket.
36
13.
Remove two bolts (37), cover (38), and gasket (39).
35
Discard gasket.
34
14.
Remove two bolts (40), cover (41), and gasket (42).
33
Discard gasket.
32
31
15.
Remove locknut (43) and nut (44). Discard locknut.
16.
Inspect two setscrews (45). If worn or damaged,
remove setscrews.
45
30
421-0228
42
43
40
41
44
0245 12-3
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |