 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
CAMSHAFT AND CAMSHAFT BEARINGS REPLACEMENT - CONTINUED
0245 06
INSTALLATION - CONTINUED
7
3.
Install gear (2) in position on camshaft (7) and install
capscrews (9). Tighten capscrews to 41.69 5 lb-ft
(55 7 Nm)
2
4.
Lubricate bearing journals of the camshaft (7) with
8
clean engine oil. Grease lobes of cam.
421-0136
CAUTION
3
A
Install camshaft with care to avoid dam-
aging bearing.
5.
Install camshaft assembly (7) in the cylinder block
2
with timing marks on camshaft gear (2) and idler gear
(3) in alignment and "C" on camshaft gear and crank-
shaft gear (1) in alignment.
6.
Install thrust washer (6), lock (5), and capscrews (4).
Tighten capscrews to 35-40 lb-ft (47-54 Nm).
4,5,6
1
421-0135
C
7.
Install front housing cover (WP 0245 05).
8.
Install engine oil pan plate (WP 0034 00).
9.
Install valve lifters (WP 0032 00).
END OF WORK PACKAGE
Change 1
0245 06-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals