|
|
TM 5-2410-237-23
FRONT HOUSING COVER AND COVER PLATE REPLACEMENT - CONTINUED
0245 05
INSTALLATION
Cover Plate
1.
If plug (34) was removed, install it in front housing plate (4).
2.
If three studs (33) were removed, install them in front housing plate (4).
3.
Install new gasket (21) on front housing plate (4). Cut the gasket even with the bottom face of the cylinder block. Apply
liquid gasket on the bottom of gasket where it makes contact with gasket of oil pan plate.
4.
Install new gasket (32) on back of front housing plate (4).
5.
Install front housing plate (4) on block assembly and secure with six capscrews (31). Tighten capscrews to 14-20 lb-ft
(19-27 Nm).
6.
Install timing gears on engine (WP 0245 07).
33
34
32
31
4
21
421-0134
0245 05-5
Change 1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |