|
|
TM 5-2410-237-23
0245 04
DISASSEMBLY - CONTINUED
WARNING
Hot oil or metal parts can cause severe burns. Wear insulated gloves, long sleeves, and eye protection when
working with heated parts.
CAUTION
Never use a direct flame to heat a connecting rod.
3.
Raise the temperature of the connecting rod to a tem-
SPACER
perature of 350 to 400F (177 to 204C).
4.
Install a spacer in the base plate.
BASE PLATE
421-0100
5.
Install connecting rod (12) on the base plate so post
12
POST ASSEMBLY
assembly is in the center of the piston pin bearing.
Install correct adapter.
ADAPTER
BASE PLATE
421-0101
Change 1
0245 04-4
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |