 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
GROUND HANDLING PROCEDURES - CONTINUED
0243 00
RAISING TRACTOR OFF GROUND - CONTINUED
3.
Move transmission gear selector to neutral and shut
8
down engine.
1
4.
Assemble hydraulic jack stands IAW step 1 of Operat-
ing/Adjusting Hydraulic Jack Stands.
5.
Place hydraulic jack stands under main frame at front
of tractor, IAW step 2 of Operating/Adjusting Hydrau-
lic Jack Stands.
6.
Move extension tube (1) of hydraulic jack stands up to
2
bottom of main frame. Install pin (8) in first hole
above collar (2). Ensure pin fits into groove of collar.
7.
Lift front of tractor using hydraulic jack stands, IAW
step 3 of Operating/Adjusting Hydraulic Jack Stands.
387-480
WARNING
Keep tractor level when tractor is elevated on jack stands to maintain stability and safety.
8.
Repeat steps 4-7, to place hydraulic jack stands underneath steering clutch cases and raise rear of tractor.
JACKING POINT
JACKING POINT AT RIGHT-
REAR OF TRACTOR.
LEFT SIDE IS THE SAME.
387-939
0243 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals