A/C COMPRESSOR INSTALLATION - CONTINUED

TM 5-2410-237-23

AIR CONDITIONING INSTALLATION INSTRUCTIONS - CONTINUED

0229 03

A/C COMPRESSOR INSTALLATION - CONTINUED

33.

Drape belt (147) over compressor (38) pulley.

34.

Install plate (148) on block (109) with two washers (149) and two bolts (150).

35.

Install swivel (151) on compressor plate (148) with washer (152) and nut (153). Do not tighten at this time.

36.

Install spacer (154) and end-adjusting rod (155) on block attached to auxiliary drive cover (104) using bolt (156). Do not

tighten at this time.

37.

Thread rod assembly (157) through swivel (151) into nut (158) and into end-adjusting rod (155). Thread nut (159) onto

end of rod so that two nuts sandwich swivel.

38.

Adjust belt tension using rod assembly (157).

39.

Tighten nuts (158 and 159) and bolt (156).

40.

Tighten bolts left loose in steps 30-32.

41.

Install belt guard (160) with two bolts (161), three washers (162) and nut (163).

42.

Evacuate system, test for leaks and charge with R-134a or approved refrigerant (not provided). Unit will require 4 to 6 lb

159

161

162

157

151

158

160

109

154 155

104

152

153

156

161

150 162 163

147

148 149

162

421-0358

0229 03-21

Change 1