 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
INSTALLATION OF ARMOR PACKAGE - CONTINUED
0228 00
INSTALLATION - CONTINUED
18.
Installation of Cab Recirculating Fan and Cab Fresh Air Intake Fan (1991 and 1996 MCAP Kits).
WARNING
Turn battery disconnect switch to OFF before working on any electrical system component. Failure to fol-
low this warning could result in personal injury or damage to equipment.
a.
Ensure battery disconnect switch is in OFF position (TM 5-2410-237-10).
b.
Install recirculating fan assembly (291) to cab mounted bracket with four bolts (292) (1/2 x 2-1/2 in.), washers
(293) and nuts (294).
c.
Install cab light (295) to cab mounted bracket with two nuts (296) and washers (297).
d.
Install assembled wiring harness (298) (dash-to-fan) from dash panel, up and over right side door to right rear win-
dow. Secure harness in place with clips (299) and existing nuts. Evenly space clips to secure harness in place.
Install grommet (300) on harness at dash panel end.
e.
Install fresh air intake fan assembly (301) on fan case assembly (249) with six bolts (302) and washers (303).
Install fan harness bracket (304) at upper left corner mounting bolt.
f.
Install assembled wiring harness (305) (recirculating fan-to-fresh air intake fan) from fan around to rear of cab
above rear window. Secure harness in place with clips (299) and existing nuts. Evenly space clips to secure harness
in place.
g.
Connect harness (305) to electrical connector on fresh air intake fan assembly (301).
h.
Connect harness (298) electrical connectors to recirculating fan assembly (291) and cab light (295).
i.
Connect BLACK wire of harness (298) to a good ground at dash panel. Connect RED wire to POSTIVE post of
ammeter. Reinstall dash panel upper cover with bolts and washers removed in step 15b, Installation of Interior and
Exterior Brackets and Handles.
0228 00-30
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals