|
|
TM 5-2410-237-23
INSTALLATION OF ARMOR PACKAGE - CONTINUED
0228 00
INSTALLATION - CONTINUED
5.
Installation of Cab Lower Left Side and Rear Plates.
NOTE
Use a suitable lifting device when installing the following components:
Cab rear top plate weighs approximately 161 lb (73 kg).
Cab rear bottom plate weighs approximately 161 lb (73 kg).
Battery box side cover weighs approximately 322 lb (146 kg).
Battery box top cover weighs approximately 75 lb (34 kg).
a.
Install battery box front cover plate (83) with three bolts (84) (1/2 x 1-1/2 in.) and washers (85).
b.
Install battery box cover brackets (86, 87, 88 and 89) with ten bolts (84) and washers (85).
86
83
89
85 84
87
88
387-807
c.
Install cab lower rear upper plate (90) with four bolts (91) (3/4 x 1-1/2 in.) and washers (92).
d.
Install lower rear plate mounting bracket (93) under lip of upper plate (90) with three bolts (94) (1/2 x 1-1/2 in.)
and washers (95) located in center holes.
e.
Install bottom plate (96) to bracket (93) with three bolts (94) and washers (95).
f.
Install electrical lead grommet (97) in bottom plate (96).
g.
Install backup mounting brackets (98) to each end of upper plate (90) with two bolts (94), two bolts (99) (1/2 x 2
in.) and four washers (95).
h.
Install backup mounting brackets (100) to each end of bottom plate (96) with three bolts (94), bolt (99) and four
washers (95).
0228 00-12
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |