|
|
TM 5-2410-237-23
CHANGING HYDRAULIC SYSTEM OIL - CONTINUED
0225 00
1.
Start engine and run at idle.
2.
Loosen plugs (11 and 12) from tee test taps on pump (13) and pressure control valve (14).
3.
Let air escape and tighten plugs (11 and 12) as soon as oil starts to run out.
12
14
13
11
NOTE
4.
Check and fill hydraulic tank (2), as required.
5.
Install filler cap (1) on hydraulic tank (2).
6.
Operate machine and check for leaks and proper operation (TM 5-2410-237-10).
7.
Install floor plates (WP 0171 00).
END OF WORK PACKAGE
0225 00-3
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |