 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE LIFT CYLINDER REPLACEMENT - CONTINUED
0220 00
ADJUSTMENT
NOTE
All spacers must be removed before adjustment. Refer to Removal, step 4.
1.
Measure gap between cap (11) and cylinder rod end
cap (19) without spacers (12).
2.
Remove four nuts (8), lockwashers (9), capscrews (10)
and cap (11). Discard lockwashers.
3.
Install spacers (12) equal to measured gap, plus ONE
spacer.
4.
Reinstall cap (11) with four capscrews (10), new lock-
89
washers (9) and nuts (8).
5.
Perform steps 7-9 of Installation.
19
6.
Apply GAA grease to grease fitting (18) on each cap
(14).
7.
Check oil level in hydraulic tank. Refill tank and bleed
air from system if necessary (WP 0225 00).
8.
Check for proper operation and leaks.
10
12
387-693
11
END OF WORK PACKAGE
0220 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals