 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
BLADE QUICK DROP VALVE MAINTENANCE - CONTINUED
0202 00
DISASSEMBLY
1.
Remove two short bolts (18), lockwashers (19), three long bolts (20), lockwashers (21) and tube assembly (16) from
quick drop valve (15). Discard lockwashers.
2.
Remove and discard O-rings (22 and 23).
3.
Remove and discard O-ring (24).
4.
Remove spring (25) and sleeve (26) from quick drop valve (15).
15
25
23
22
19
18
26
24
20
16
21
ASSEMBLY
NOTE
Lightly coat spring, sleeve and new O-rings with clean oil before assembly.
1.
Install sleeve (26) and spring (25) into quick drop valve (15).
2.
Install new O-rings (22, 23, and 24).
3.
Install tube assembly (16) to quick drop valve (15) with three new lockwashers (21) and long bolts (20) and two new
lockwashers (19) and short bolts (18). Tighten bolts to 60 lb-ft (81 Nm).
0202 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals