 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
WINCH CONTROL VALVE REPLACEMENT - CONTINUED
0181 00
INSTALLATION
NOTE
Lightly coat new O-rings with clean oil before installation.
1.
Place three new O-rings (23) on control valve (22). Place new gasket (24) on mating surface of winch. Position control
valve on winch.
2.
Install four 5-3/4 in. long capscrews (16) and washers (17).
3.
Install 5-1/4 in. long capscrew (18) and washer (19).
4.
Install 4 in. long capscrew (20) and washer (21).
5.
Install cable (15) in control valve with capscrew (13) and washer (14).
6.
Install cable (12) in control valve with capscrew (11) and new self-locking nut (10).
7.
Align cable (12) and install clamp (9) with capscrew (7) and washer (8).
8.
Adjust cables (2) (WP 0182 00).
9.
Connect hose (5) to control valve and tighten fitting (6).
10.
Check winch for proper operation and leaks.
2,3
1,3
11.
Install cover (4) with two capscrews (1), capscrews (2)
and four new lockwashers (3).
4
387-387
END OF WORK PACKAGE
0181 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals