 |
|||
|
|
|||
|
Page Title:
SEAT AND SEAT BASE ASSEMBLY REMOVAL (Cont) |
|
||
| ||||||||||
|
|
 TM 5-2410-237-23
SEAT, SEAT BASE ASSEMBLY AND SEAT BELT REPLACEMENT - CONTINUED
0172 00
SEAT AND SEAT BASE ASSEMBLY REMOVAL - CONTINUED
13.
Remove six capscrews (33) and washers (34) from right side of seat base assembly (5).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Seat base assembly weighs 72 lb (33 kg).
14.
Attach nylon slings and a suitable lifting device to seat base assembly (5).
15.
Remove three capscrews (35) and washers (36) from left side of seat base assembly (5).
16.
Lift seat base assembly (5) from tractor.
17.
Remove self-locking nut (37) and capscrew (38) and disconnect selector lever (39) from fork (40). Disconnect self-lock-
ing nut.
18.
Remove two capscrews (41), capscrews (42), four lockwashers (43 and 44) and linkage assembly (45) from seat base
assembly (5). Discard lockwashers.
19.
Remove capscrew (46), washer (47), nut (48), lockwasher (49), capscrew (50), washer (51) and shield (52). Discard
lockwasher.
20.
Remove capscrew (53), washer (54) and transmission control box assembly (55) from seat base assembly (5).
49
35
39
37
38
40
48
45
55
34
33
52
54
53
36
43
50
51
47
41
46
44
5
42
34
387-412
33
0172 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals