 |
|||
|
|
|||
|
Page Title:
SEAT AND SEAT BASE ASSEMBLY REMOVAL |
|
||
| ||||||||||
|
|
 TM 5-2410-237-23
SEAT, SEAT BASE ASSEMBLY AND SEAT BELT REPLACEMENT- CONTINUED
0172 00
SEAT AND SEAT BASE ASSEMBLY REMOVAL
1.
Pull rod assembly (1) at front of seat vertical adjuster (2) forward to release seat lock.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Seat with vertical adjuster weighs 70 lb (32 kg).
2.
Attach nylon sling and suitable lifting device to back of seat (3).
3.
Slide seat (3) back and straight up so hinge pins (4) slide out of seat base assembly (5). Remove seat with vehicle
adjuster (2) from tractor.
4.
Remove transmission selector lever knobs (6), blade control lever knob (7) and winch/ripper control lever knob (8).
5.
Remove two capscrews (9), washers (10) and armrest
3
assembly (11).
6.
Remove two capscrews (12) and washers (13).
7.
Remove eight capscrews (14), washers (15) and
cover (16).
4
8.
Remove five capscrews (17), washers (18) and
2
plate (19).
1
6
11
10
4
14,15
8
9
16
5
7
17,18
19
12,13
387-407
0172 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals