 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
FENDERS AND FENDER MOUNTING REPLACEMENT - CONTINUED
0170 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Beam assembly weighs 36 lb (16 kg).
5.
Attach a nylon sling and a suitable lifting device to beam assembly (13). Remove four capscrews (17), nuts (18) and
lockwashers (19) from beam assembly and fenders (20). Remove beam assembly (13). Discard lockwashers.
6.
Remove one spacer plate (21) and shims (22). Keep shims together.
NOTE
Fenders weigh approximately 340 lb (154 kg).
7.
Attach a nylon sling and a suitable lifting device to R.H. fender (20) and take up slack in sling.
21
18
13
22
20
19
17
387-982
0170 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals