|
|
TM 5-2410-237-23
ROPS MOUNTING BRACKETS AND PLATES REPLACEMENT - CONTINUED
0165 00
REMOVAL - CONTINUED
NOTE
L.H. plate weighs 48 lb (22 kg).
5.
Attach a nylon sling and a suitable lifting device to L.H. plate (11).
6.
Remove three capscrews (12) and washers (13) from bottom edge of L.H. plate (11).
7.
Remove six capscrews (5), washers (6) and L.H. plate (11).
8.
Remove three capscrews (14), washers (15) and block (16) from left rear of machine.
11
16
13
15
14
6
12
5
387-279
NOTE
Cover weighs 17 lb (8 kg).
9.
Remove five capscrews (17), washers (18), lockwashers (19) and cover (20) from back of machine. Discard lockwash-
ers.
10.
Remove four capscrews (21), washers (22) and gas can support bracket (23) from support assembly (24).
NOTE
Support assembly weighs 453 lb (206 kg).
11.
Attach a nylon sling and a suitable lifting device to support assembly (24).
12.
Remove three capscrews (25), six washers (26) and three nuts (27) from one side of support assembly (24).
13.
Remove capscrew (28), washer (29) and shims (30) on same side of support assembly (24).
14.
Repeat steps 12 and 13 on other side and remove support assembly (24) from machine.
0165 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |