 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
HYDRAULIC TANK MOUNTING BRACKETS AND PLATES REPLACEMENT - CONTINUED
0156 00
REMOVAL - CONTINUED
14.
Remove eight capscrews (45), washers (46) and side
44
45,46
panel (44).
387-516
INSTALLATION
1.
Install side panel (44) with eight washers (46) and capscrews (45).
2.
Install pilot valve (43) to side panel (44) with three washers (42) and capscrews (41).
3.
Install bracket (40) to plate assembly (4) with two washers (39) and capscrews (38).
4.
Position bracket (37) and brace (31). Install capscrew (35), two capscrews (33), and four washers (36 and 34) to secure
lower end of brace to plate assembly (4).
5.
Secure upper end of brace (31) to hydraulic tank (32) with two capscrews (29), four washers (30) and two nuts (28).
6.
Install brace (26) to hydraulic tank bracket (27) and plate assembly (4) with four capscrews (23), eight washers (24) and
four nuts (25).
7.
Install panel (22) to plate assembly (4) with three washers (21) and capscrews (20).
8.
Install bracket assembly (19) to plate assembly (4) with two washers (18) and capscrews (17).
9.
Install washer (16) and capscrew (15).
19
4
15,16
17,18
20,21
22
387-513
0156 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals