 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
STEERING BRAKE HYDRAULIC CONTROL ASSEMBLY MAINTENANCE - CONTINUED
0151 00
REMOVAL - CONTINUED
30.
Install two (1/2 -13NC x 4 in. long) forcing screws (51), one at each end of hydraulic control (12).
31.
Turn forcing screws (51) evenly until hydraulic control (12) is raised off locating pins (52) on top of gear case.
32.
Remove two forcing screws (51) and install two lifting links (53) with 1/2-13 x 1-1/2 in. bolts, one at each end of
hydraulic control (12).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
33.
Attach a suitable lifting device to lifting links (53) and
remove hydraulic control (12) from tractor.
34.
Position hydraulic control (12) on work surface and
remove lifting links (53).
53
51
12
52
387-942
0151 00-6
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals