|
|
TM 5-2410-237-23
STEERING BRAKE ACTUATING MECHANISM MAINTENANCE - CONTINUED
0150 00
ASSEMBLY - CONTINUED
22.
Install ratchet (16) between two small bosses in actu-
12
13
10
ating mechanism (2) with shaft (18) and new spring
11
pin (17).
23.
Install pin (9) in ratchet (16) with new spring pin (15).
14
24.
Install two links (12) on pin (9) in ratchet (16).
7
25.
Install other end of two links (12) and roller (13) in
bellcrank (14) with pin (11) and new cotter pin (10).
9
26.
Install two springs (7) on both sides of pin (9) and on
7
welded pins (8) on actuating mechanism (2).
2
16
17
12
15
18
8
387-695
27.
Adjust actuating mechanism (2) as follows:
a.
Install one 3/8 in. (9.53 mm) rod (65) through holes in actuating mechanism (2) and bellcrank (14).
b.
Hold lever (49) against back plate of actuating mechanism (2).
c.
Separate struts (3) in order to remove slack in linkage.
d.
Measure distance A between strut (3) and plate (64) with a feeler gage. Correct distance is 0.010 +/- 0.005 in. (0.25
+/- 0.13 mm).
e.
Add or remove shims (63) as needed to adjust distance A.\
14
65
2
63
A
49
387-701
64
0150 00-10
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |