 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-237-23
TRACK ROLLERS REPLACEMENT - CONTINUED
0134 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in death
or injury to personnel.
Use assistance and extreme caution when using a chain and tanker bar to stabilize track roller. Ensure
track roller is securely supported.
NOTE
Weight of a single-flanged roller is 155 lb (70 kg). Weight of a double-flanged roller is 170 lb (77 kg).
1.
Attach a suitable lifting device to chain and pry bar under track roller (1) to hold roller in position.
2.
Install lock collar (4) in track roller (1).
3
1
3.
Install four washers (3) and capscrews (2) to secure
track roller (1). Tighten capscrews to 550 lb-ft (746
Nm).
4.
Lower track onto track roller (1) and remove hydraulic
jack.
5.
Lower machine to the ground (WP 0243 00).
6.
Tighten and adjust track (WP 0132 00).
7.
Install track roller guards (WP 0162 00).
8.
Test drive and check track for proper operation (TM 5-
2410-237-10).
387-592
2
END OF WORK PACKAGE
0134 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals