|
|
TM 5-2410-237-23
TRACK DRIVE SPROCKET SEGMENTS REPLACEMENT - CONTINUED
0131 00
REMOVAL - CONTINUED
NOTE
Move tractor at intervals and inspect five sprocket segments per track for cracked or broken teeth and
loose or missing nuts and capscrews.
4.
Remove four nuts (9), bolts (10) and sprocket segment (11) from hub (12).
3
10
11
12
9
1,2
4,5
6,7
8
387-574
INSTALLATION
NOTE
Ensure mounting surfaces are clean.
Lightly coat bolt thread, with oil before installation.
1.
Install sprocket segment (11) to hub (12) with four bolts (10) and nuts (9). Tighten nuts to a wet torque of 220 lb-ft (298
Nm), then tighten 1/3 turn more.
NOTE
3
Apply antiseize compound to all mounting
bolts before installation.
2.
Install guard (8), four washers (7) and bolts (6).
3.
Install guard (3), two washers (5) and bolts (4).
4.
Install three washers (2) and bolts (1) securing guard
(3).
1,2
4,5
6,7
8
387-690
5.
Test drive and check for proper operation (TM 5-2410-237-10).
END OF WORK PACKAGE
0131 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |