|
|
TM 5-2410-237-23
DRIVESHAFT AND U-JOINT REPLACEMENT - CONTINUED
0129 00
INSTALLATION
1.
Install U-joint (4) to each end of driveshaft (1) with four washers (6) and bolts (5). Tighten bolts to 40 lb-ft (54 Nm).
2.
Use a nylon sling to support driveshaft (1) with u-joints (4). Secure to transmission and torque divider with eight wash-
ers (3) and bolts (2).
3.
As needed, apply grease to each U-joint grease fitting.
4.
Install floor plates (WP 0171 00).
END OF WORK PACKAGE
0129 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |